Ladder Type Cable Trays

Ladder Type Cable Trays

M.N Enterprises is the leading manufacturer of ladder type cable trays with accessories. Cable Trays are available in different sizes as per the customer specifications. We manufacture cable trays in the following thicknesses – 1.2 mm, 1.5 mm, 1.6 mm, 2.0 mm, 2.5 mm, and 3.0 mm & width – 75 mm to 1600 mm, cable trays are available in different finishes like Hot dip galvanized, Pre galvanized, powder coated, etc. The cable tray accessories for ladder type cable trays are vertical bends, horizontal bends, inside bends, outside bends, reducers with radius 50,100,150, 300, 600, 900 are available.

Advantages of Cable Trays:-

  • Cost Saving
  • Design cost Savings
  • Dependability
  • Installation cost and time saving.
  • Material Savings
  • Maintenance Savings
  • Space Savings

Cable Tray – Ladder Type

Cable Tray – Ladder Type is ideal to install at large volume of Heavy duty power cables. Perforation make full free air rating of cable, Higher current flow can be achieved at the same cross section, Overheating and consecutive damaging of cable is avoided, coupler holes in side guarantees easy connecting of cable trays to each other , Cable trays can be manufactured in Hot Dip Galvanized Finish (Galvanizing As Per Is – 2626), Pre-Galvanized Finish (Material As Per Is – 277), Powder Coating Finish (Powder Coating As Per Is – 101), Stainless Steel Grade – As Per 316 , 304 & In Aluminium-Commercial Grade Finish. Height of cable trays Is varies from 40,50,70,75,100 & 250 mm, Width of cable trays is varies from 75 to 1600 mm, Thickness of cable trays ranging from 10,12,14,16,18 SWG, i.e. 3,2.5,2,1.6,1.2 mm.

Ladder Type Cable Trays Accessories

Height of cable trays is varies from 40,50,70,75,100 & 250 mm , Width of cable trays is varies from 75 to 1600 mm ,Thickness of cable trays ranging from 10,12,14,16,18 SWG, i.e 3,2.5,2,1.6,1.2 mm

‘T’ Bend

‘T’ Bend – Ladder Type is suitable for joining cable trays in three directions at 90 degree intervals in the same plane. Our product design allows the cable to route properly and hamfer of bend take care of cable not to worn out, peel off or get damage while lying of cables.

Cross Bend

Cross Bend – Ladder Type is mainly use for laying the cable horizontally which allows the cable to route from four ends. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cables.

Horizonal Bend (Elbow)

Horizontal Bend (Elbow) – Ladder Type are mainly used in combination with perforated type of cable trays to route the cable in 90 degree where two wall are conjoining with constrain of vertical pillar or obstacle to it. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out , peel off or get damage while laying of cables.

Vertical Bend Outside

Vertical Bend Outside – Ladder Type are mainly use in combination with perforated type of cable trays to route the cable where the direction changes to a different plane.

Vertical Bend Outside – Ladder Type changes direction downward from the horizontal plane. our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Vertical Bend Inside

Vertical Bend Inside – Ladder Type are mainly used in combination with perforated type of cable trays to route the cable where the direction changes to a different plane.

Vertical Bend Inside – Ladder Type changes direction upward from the horizontal plane .our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Reducer Central

Reducer Central – Ladder Type are mainly used in combination with perforated type of cable trays to route the cable where cable tray is suitable for joining cable trays of different widths in the same plane. A Reducer Central – Ladder Type has two symmetrical offset sides.

Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Reducer Left Hand

Reducer Left Hand-Perforated Type are mainly used in combination with perforated type of cable trays to route the cable which is suitable for joining cable trays of different widths in the same plane.

A Reducer Left Hand-Perforated Type when viewed from the large end has a straight side on the left. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Reducer Right Hand

Reducer Right Hand – Ladder Type are mainly used in combination with perforated type of cable trays to route the cable which is suitable for joining cable trays of different widths in the same plane. A Reducer Right Hand – Ladder Type, when viewed from the large end, has a straight side on the left.

Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Contact Us